DEA Cabinets

Dea Workshop Furniture
ITALIAN DESIGN
Dea Workshop Cabinets
FINEST QUALITY
Dea Workstation
CUSTOM LAYOUTS
Dea Cabinets in recess
AFFORDABLE PRICE
previous arrow
next arrow
ArrowArrow
Shadow
Slider

OVER TWENTY SOLUTIONS FOR ANY NEED

Dea Workshop Cabinets have over 20 different types of design, with retracting doors to eliminate encumbrances when open, with reduced depths for use as computer workstations, designed to accommodate columns or lift consoles, or even with flat bottoms for housing trolley-mounted utensils. For every workstation within the workshop and for every possible requirement.

 

AR-002.10 – SINGLE DOOR CABINET

Cabinet with left-hinged door mounted on guides that allow for entry inside the module once opened, thus allowing the operator to work with the door open without blocking the passageway. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet for properly levelling the module, 2 adjustable shelves, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Height of 110 cm (with worktop installed)
  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-003.10 – SINGLE DOOR CABINET

Cabinet 30cm deep with a left-hinged door. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet for properly levelling the module, an adjustable shelf, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated. In addition to being ideal for housing and protecting a PC in the computer area, its depth of just 30 cm even allows it to be positioned in the confined spaces between the lifts and the walls. The operator can work from a comfortable seated position while keeping their legs underneath the work surface.

  • Height of 110 cm (with worktop installed)
  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-018.10 – SINGLE DOOR CABINET

Cabinet with left-hinged door mounted on guides that allow for entry inside the module once opened, thus allowing the operator to work with the door open without blocking the passageway. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet for properly levelling the module, an adjustable shelf, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-019.10 – SINGLE DOOR CABINET

Cabinet with right-hinged door mounted on guides that allow for entry inside the module once opened, thus allowing the operator to work with the door open without blocking the passageway. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet for properly levelling the module, an adjustable shelf, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

 

AR-026.10 – SINGLE DOOR CABINET

Cabinet 30 cm deep with a left-hinged door. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet for properly levelling the module, an adjustable shelf, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated. In addition to being ideal for housing and protecting a PC in the computer area, its depth of just 30 cm even allows it to be positioned in the confined spaces between the lifts and the walls. The operator can even work from a comfortable seated position while keeping their legs underneath the work surface.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-048.10 – SINGLE DOOR CABINET

Cabinet with left-hinged door. The cabinet has no bottom or back panel. This characteristic allows it to be installed in the presence of columns, or else to integrate columns for double scissor lifts. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet for properly levelling the module, and an adjustable hinge for properly aligning the door with the cabinet.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-052.10 – SINGLE DOOR CABINET

Cabinet with right-hinged door mounted on guides that allow for entry inside the module once opened, thus allowing the operator to work with the door open without blocking the passageway. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet for properly levelling the module, 2 adjustable shelves, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Height of 110 cm (with worktop installed)
  • Epoxy powder coating.
  • Hinge for adjusting the door.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-067.10 – SINGLE DOOR CABINET

Cabinet with left-hinged door, 200 cm tall. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium, adjustable feet for properly leveling the module, 3 adjustable shelves, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-068.10 – SINGLE DOOR CABINET

Cabinet with right-hinged door, 200 cm tall. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium, adjustable feet for properly levelling the module, 3 adjustable shelves, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-069.02 – SINGLE MODULE CABINET

A cabinet with a manual locking shutter, equipped with 2 extractable shelves mounted on guides, a handle with a key-operated lock, and adjustable feet for properly levelling the module. All the components are epoxy powder coated. Furthermore, there are pre-cuts in the upper and rear zones that can be easily opened during the installation phase in order to feed electrical wires or air hoses into the sides of the cabinet.

  • Two extractable shelves mounted on guides.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-136.10 – DOUBLE CABINET MODULE

Cabinet with two doors 200 cm. tall 144 cm. wide. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium, adjustable feet for properly levelling the module, 3 adjustable shelves, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • High containment capacity.
  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-135.10 – DOUBLE CABINET MODULE

A cabinet with two doors and a large containment capacity, equipped with a key-operated lock, an ergonomic handle in extruded aluminium, adjustable feet for properly levelling the module, an adjustable shelf, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Ample containment capacity.
  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-142.10 – DOUBLE CABINET MODULE

A cabinet with two doors and a large containment capacity, equipped with a key-operated lock, an ergonomic handle in extruded aluminium, adjustable feet for properly levelling the module, an adjustable shelf, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Height of 110 cm (with worktop installed)
  • Ample containment capacity.
  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.

AR-176.10 – DOUBLE CABINET MODULE

Cabinet with right door complete with handle, and left door blind for creating corner configurations. The closed side remains accessible from the open-able side in order to allow for all the internal space to be exploited. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium, adjustable feet for properly levelling the module, an adjustable shelf, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.
  • Creation of corner configurations exploiting 100% space inside cabinet.

n

AR-177.10 – DOUBLE CABINET MODULE

Cabinet with left door complete with handle, and right door blind for creating corner configurations. The closed side remains accessible from the open-able side in order to allow for all the internal space to be exploited. The cabinet is equipped with a key-operated lock, an ergonomic handle in extruded aluminium, adjustable feet for properly levelling the module, an adjustable shelf, and an adjustable hinge for properly aligning the door with the cabinet. All the components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.
  • Creation of corner configurations exploiting 100% space inside cabinet.

AR-235.10 – SINGLE MODULE WITH DOUBLE DOORS

Cabinet with two left-hinged horizontal doors (each with key-operated locks), two independent compartments with removable shelves mounted on guides, an ergonomic handle in extruded aluminium with inserts for labels, adjustable feet for properly levelling the module, and an adjustable hinge. All the components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Possibility to feed cables and hoses for connecting to local systems.
  • Two independent compartments equipped with extractable shelves.

AR-K048.10XW – MODULE WASHING BASIN

Cabinet with left-hinged door complete with stainless steel part washing basin. The module is equipped with an upper stainless steel basin, a car brush powered by a pump positioned underneath the basin, a compressed air gun, and a basin closure panel. The cabinet also comes complete with a locking left-hinged door, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet, and an adjustable hinge for properly aligning the door with the cabinet. All the module’s components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Ergonomic chrome-plated handle designed to endure over time.

AR-K058.10 – MODULE WASHING BASIN

Cabinet with left-hinged door complete with stainless steel wash basin. The cabinet also comes complete with a locking left-hinged door, an ergonomic handle in extruded aluminium with guides for inserting labels, adjustable feet, and an adjustable hinge for properly aligning the door with the cabinet. All the module’s components are epoxy powder coated.

  • Hinge for adjusting the door.
  • Epoxy powder coating.
  • Adjustable feet.
  • Perfect integration of the wash basin within the structure.